b'1.9 Cavity System1.9.4 INSTALLATIONStep 1:Install suitable membrane (See wall sarking requirements section 1.4.7)Step 2:Install Cavity CloserStep 4For Cavity Systems these fastening pointsStep 3at noggins needInstall 9.5 Weathertex cavity to be packedbattens on studwith a piece of cavity batten to support the jointStep 5Install Weathertex as per standard instructionsEnsure required ground clearance is maintained(Refer to general requirements section 1.4.4)9.5mm Cavity BattenWeathergrooveSmall Cavity Closer9.5mm Cavity Batten WeathergrooveWeathertex 17'